Dell pp18l is an early business notebook launched by Dell. Although many years have passed, this notebook has been discontinued and removed from the market, but I believe that many friends who have used notebooks earlier will have an impression of this model. Next, the editor will sort out the configuration parameters and disassembly tutorial of Dell pp18l for everyone. Interested friends can read on.
Dell pp18l configuration details
This notebook uses the Intel T2300 processor, which is also a classic Intel processor. A model that used to be a very mainstream model among notebooks, but is now basically obsolete. In terms of screen, the screen size of this notebook is 14 inches, which can bring users a good sensory experience. In terms of memory, the memory of this notebook is only 512MB, which is not up to the mainstream configuration in the current market. If it is only used for processing office documents and simple entertainment, it is quite sufficient. The hard drive used in this notebook is a Hitachi one. The capacity is not large, only 80GB, and the speed is not high enough, which is not enough for today.
Dell pp18l disassembly steps
1. First remove the notebook battery, and then use all the small Remove the covers one by one and unscrew all visible screws to remove the bottom cover.
2. After removing the casing, the first thing we see is the optical drive of the notebook. It is fixed with only one screw. After unscrewing the screw, you can remove the optical drive. After removing the optical drive, unscrew the three screws below the optical drive.
3. Next, come to this side of the keyboard. Use a practical tool to directly pull out the keyboard frame, and be careful not to break the hidden buckle. After removing the keyboard frame, unscrew a few screws on the edge of the keyboard, and then gently lift the keyboard. After unplugging the cable on the back of the keyboard, we can remove it smoothly.keyboard.
4. Next, remove the panel under the keyboard. It can also be removed by simply unscrewing the screws. Then we can see the laptop's hard drive. There is a ribbon cable above the hard drive connected to the motherboard. We need to remove the ribbon cable first, then unscrew the screws that fix the hard drive, and then remove the hard drive.
5. Next, remove the motherboard interface, including the speaker cable, fan, microphone interface, etc., and unscrew other screws marked with numbers.
6. Then carefully remove the screen cable interface. Since the screen cable interface is relatively fragile, everyone must be careful.
7. After all the interfaces on the motherboard are processed, we can take out the laptop's care board. At this time, we can also see that the notebook's heat sink is fixed on the CPU. We only need to unscrew its screws to remove it, and the disassembly is basically completed.
The above is the configuration information and disassembly tutorial of Dell pp18l. I hope the editor's introduction can bring useful information to all my friends.