With the rapid development of science and technology and the continuous improvement of people's living standards, more and more products can be appears in our lives and plays a pivotal role in our daily lives. For example, today’s computers and mobile phones. I believe that many of my friends cannot do without computers now, because some jobs now require the use of computers. However, for some reasons, such as dust removal, we need to take the computer apart. Let the editor take you through the Lenovo y530 disassembly tutorial.
1. Preparation for disassembly: If a worker wants to do his job well, he must first sharpen his tools. Necessary tools for Y530 disassembly: several cross-type screwdrivers of different specifications and a slotted screwdriver (used as a crowbar), a tube of thermal grease, a cleaning kit, and a bank card (or steel ruler).
2. When dismantling a machine is such a delicate matter, you should wash your hands first to prevent static electricity. Turn off the Y530, unplug all connecting cables and eject the card from the card reader, and remove the battery.
3. Unscrew the screws and pull outward to remove the optical drive, then remove the memory cover and hard drive cover on the rear panel.
4. After removing the back cover, you can see the hard drive, TV card, wireless network card, modem, memory, radiator, fan, etc. Remove the two screws and pull to remove the hard drive.
5. Remove the screws, unplug the fan power cord, and then remove the fan.
6. Remove the screws, gently lift the radiator from the side of the graphics card, pull the radiator out, and apply the thermal grease.
7. After removing the radiator, you can find that in addition to dissipating heat for the CPU, Xiao Y's radiator also dissipates heat for some surrounding auxiliary chips.
8. At this point, the memory can be removed. Remove other screws and unplug various cables. Remove the TV card and wireless network card (there are three antenna-like things here, be careful not to order them in the wrong order) and install the graphics card.
The modem is a PCB, and the modem can be removed by removing the screws and pulling it up with the black strap. Pay attention to the rows on the side.
9. Remove all the screws (pay attention to the correct categories), pay special attention to the optical drive. 10. At this time, it is not possible to separate the front panel from the rear panel. Remove the keyboard and the electrostatic touchpad above the keyboard. Open the laptop screen to the maximum angle. The touchpad is completely connected to the front panel by means of hidden buckles, which are quite tight and can only be secured by the force of your fingernails. It is difficult to remove. The red lines in the picture below are hidden buckles.
11. When disassembling, you need to use a steel ruler (or bank card) to insert it into the middle area of the touch panel and the front panel. In the gap. Use force to expand the gap to see the hidden buckle. Move the steel ruler from the middle to both sides and pry open the hidden buckle on both sides. There are 5 hidden buckles here. You can pull the touchpad to the right to open a hidden button on the left, and then push the middle area of the touchpad toward the keyboard to open the three hidden buttons in the middle. < /p>
12. The remaining two hidden buckles near the upper left corner and the upper right corner of the keyboard are the most difficult to remove. You also need to use a steel ruler. Take the hidden buckle on the left as an example. First, remove the steel ruler. Insert the dot into the gap between the left side of the touchpad and the front panel (right side of the power button), and gradually move it downward. At this time, use a steel ruler to pry the touchpad to the right, and at the same time, force the touchpad
Push the keyboard side to release the hidden buckle. The secret buckle on the right side can be disassembled in the same way, but please note that there is a cable on the right side, so be careful when disassembling it.
< p> The touch panel is the most difficult part of the disassembly process. It requires a certain amount of "violence" and a lot of skills. You must be "bold and careful" to disassemble it blindly, as it can easily damage the hidden buckle. structure, it is strongly recommended to have some disassembly experience before trying it.13. Next is the situation after the touch panel is disassembled. Disassemble the two cables on the right side to remove the touch panel.
14. Lift the keyboard upwards, pay attention to disengage the buckles on both sides of the keyboard, and lift the keyboard to about 70~80 degrees from the bottom to the screen side. Drag to remove the keyboard from the front panel. Pay attention to the row below the keyboard.
15. Next, remove the keyboard cable.
16. Unscrew the screws. , and disconnect the cables in the yellow circle. At this time, the front panel and the rear panel can be separated.
17. From Use your nails or other objects to carefully pry open the front panel from the expansion card slot in the lower left corner. Walk around the left, bottom and right sides of the panel and lift the front panel up from the bottom. If nothing goes wrong, you can easily lift the front panel off. Come down.
18. After taking off the front panel, you can see the motherboard.
19. Turn up the copper piece in the lower right corner and remove the four screws and two screws. For cables, there are also CMOS button batteries.
To connect the cable, lift the interface card from the left side and pull it to the left.
20. Take it out. After removing the interface card, remove the screws and cables.
21. Lift the right side of the motherboard from the rear panel and pull it to the right to remove the motherboard.
< p> 22. Remove the rear panel after the motherboard. The remaining parts are mainly speakers, subwoofers and power supplies.24. To install, proceed in the reverse order and disassemble them. Of course, the installation is not difficult. Just be careful not to drop the cables or screws. Especially before installing the classic touchpad, you must carefully check whether everything that should be connected is connected and everything that should be tightened is tightened. Go to the touch panel and find the problem again.
OK, the above are the detailed steps of the Lenovo y530 disassembly tutorial. In fact, many friends do not know how to disassemble the machine. , so you will be sweating profusely when you try it for the first time. If you have a Lenovo y530 and need to disassemble it, you can refer to the steps here. However, we should pay attention to the disassembly of the Lenovo y530. During the disassembly process, be bold and careful, and remember every disassembly step, and the screws must be placed in a certain order to avoid confusion.