With the improvement of the quality of life, we have gradually entered the information age. Computers have become an indispensable tool in our lives. With the continuous development of technology, notebooks have become more compact, delicate and convenient. The computer they carry has become the object of purchase by consumers. As a notebook with good performance, Lenovo g5080, do you know how to enter the bios of Lenovo g5080? And how to add solid state drive SDD? Let me give you a detailed introduction below. .
1. Lenovo g5080 plus solid state drive SDD
Preparation tools
First, install the optical drive into the hard disk tray Laptop SSD solid state drive bracket 2.5-inch SATA3.0 is to install the solid state drive here, and then install this into the optical drive of the laptop.
Note: When buying this item, you should clearly see the 7mm/9.5mm/thickness dimensions.
Method/steps
1. Unscrew the three screws under the bottom of Lenovo g5080, and then press the cover The bottom cover can be removed by pushing it outward.
2. Please pay attention to the screw marked in red, which is more important. This screw is to fix the optical drive. Remove this screw, then pull the optical drive out. After pulling out the optical drive, remove the panel from the optical drive. Set aside.
3. After you buy the optical drive, there are instructions on it explaining how to install the solid-state drive into the optical drive. Note that you need to remove the optical drive panel and the small iron piece that positions the optical drive.
4. Then insert the optical position of the hard disk into the optical drive position of the laptop, then lock the screw under the back cover, and then tighten the back cover.After the cover is closed, you can turn it on and try to see if it is installed properly.
5. Enter the BOIS of Lenovo g5080 to see if there is an extra solid-state drive. This completes the operation steps.
How to enter bios on Lenovo g5080?
Method 1
After booting, quickly press [FN+ F2】key combination. Press and release until the BIOS appears. This is the interface of Lenovo g5080 BIOS. You can set the functions you want here.
Method 2
1. There is a small button near the power supply. When the computer is shut down, press this small button and the computer will start.
2. After starting, you will see the interface
3. Then you use the keyboard Use the up and down buttons to move the cursor to [BIOS Setup] and press Enter.
4. What you see now is the Lenovo g5080BIOS interface.
I believe that through the above detailed introduction on how to enter the bios of Lenovo g5080 and how to add solid state drive SDD, you can know how to enter bios and add solid state drive SDD on Lenovo g5080 in the future. How to solve the problem of solid state drive SDD will be helpful. We all know that the flexibility of computers can bring us great convenience in work and life, but sometimes we have certain doubts about the operation of computers. Mastering how to enter the bios of Lenovo g5080 and how to add solid state drive SDD will be of great help to you in solving problems in the future.